Test Executive has been verified for compatibility as follows:
| Test Executive | Release Build | Compatible Third Party SW |
| UniPro | v1.2.3835 | Logic and Protocol Analyzer Software (64-bit): version 06.30.1011 U4431A-613 MIPI M-PHY Command Line Packet Generator (64-bit): version 06.30.1011 * See note 2 * See note 1 |
| v1.1.3504 | Keysight Application SW v6.2 Keysight Analyzer FW 6.20.1018 Keysight CLPG FW 6.20.1018 * See note 2 |
|
| v1.1.3270 | Keysight Application SW v6.2 Keysight Analyzer FW 6.20.1014 Keysight CLPG FW 6.20.1014 * See note 1 |
|
| UFS | v1.3.1364 | Logic and Protocol Analyzer Software (64-bit): version 06.30.1011 U4431A-613 MIPI M-PHY Command Line Packet Generator (64-bit): version 06.30.1011 * See note 1 |
| v1.3.1339 | Keysight Application SW v6.2 Keysight Analyzer FW 6.20.1001 Keysight CLPG FW 6.20.1001 * See note 1 |
|
| v1.3.1156 | Keysight Application SW v6.1 Keysight Analyzer FW 91.27.1038 Keysight CLPG FW ver_9064 |
|
| Greybus | V1.0.1335 | Keysight Application SW v6.1 Keysight Analyzer FW 91.27.1038 Keysight CLPG FW ver_9064 |
Notes:
* Note 2:
- The data generator does not drive the line(s) into hibernate within the M-PHY specified amount of time, the issue is typically seen as Power Mode Change Failure where the DUT does not respond.
- Sometimes during a power mode change the data generator Lane 1’s Prepare and sync states do not meet the M-PHY specification causing Power Mode Change Failures.
* Note 1:
There are known issues with Keysight’s 6.30.1011, 6.20.1033, 6.20.1014, 6.20.1010 and 6.20.1001 data generator. However, these releases have been tested for compatibility with Test Executive and, notwithstanding these known issues, are the recommended releases for use Test Executive. See Test Executive release notes for more information.